|
 |
|
|
|
Wind-Dreams |
|
|
|
Contact Me |
|

|
|
Approved Sites |
|




|
|
|
  
Wind
Knowledge
Wind speed and direction could be
classified as the most important factor to learning to fly. Too
little wind and your kite may not get off the ground, to much
wind and YOU may be off the ground or your kite may sustain
permanent damage. Trying to learn this exciting sport with a
kite that is either too big or too small for the present wind
conditions can make your learning experience a very frustrating
one. This doesn't mean that you need to go out and purchase an
arsenal of different size kites, you may just need to wait until
the wind increases or decreases for the kite you currently have.
You don't need to know the "exact" speed and direction of the
wind, but you do want to have a very good idea of how strong it
is and where it is coming from. If you are starting out with a
power/traction kite, be very careful! Power kites are designed
to pull surfboards, buggies, mountain boards, snowboards and
YOU! Too much wind for your kite and you could be in for a
ride that may end up in the emergency room. Many kite flyers
will use a windsock or spinsock to give them an idea on wind
direction and speed. Many others look at branches on trees or
other vegetation to give them an idea on wind speed and
direction. If you have some extra cash, you could invest it in a
high-tech hand held electronic wind meter. For me, most of the
time I just glance at the branches on a tree located at the end
of the park we frequently buggy at.

The diagram above shows the "Wind
Window" - the pink and tan areas. These represent the area where
your kite should be able to perform best. The pink area is where
your kite is directly in the winds path, this area will give you
the greatest amount of pull if you are flying a traction/power
kite; or the best control and speed if you are flying a
stunt/sport kite. The tan areas are where the kite will start to
decrease in power or slow down. Turns are usually done in the
Tan area as well as launching and landing your kite. The edge
(grey area) of the "Wind Window" is at the end of the Tan area
and is where the least amount of wind is on the kite. The exact
location of the edge of the wind window will vary depending on
the style of kite you are flying. Usually when a kite approaches
the grey area or edge, it will begin to "luff" or "stall",
causing the kite to drop out of the air. If this happens, you
may have to take a couple quick steps backwards to bring your
kite back into the tan area, allowing you to turn your kite and
continue flying.
Forcing your kite to fly past the
edge of the wind window and slightly towards the ground will
allow you to safely land your kite, regardless of wind power. As
you fly your kite across the horizon, be prepared for the
increase in speed and power as the kite passes through the wind
window. Many people have had an unfortunate encounter with the
ground by underestimating the strength of the wind in the pink
area, this is especially important for people learning to fly
power kites. Some ram-air style kites have the ability to create
additional power as they increase in speed through turns,
generating even more power than usual as they continue their
turn and as they pick up speed passing through the centre of the
wind window, this can be quite challenging for the beginning
kite flyer.

The diagram
above shows you the horizontal view of the wind window (side to
side), the wind window also has a vertical area (up and down) as
illustrated in the diagram to the left. The pink area
illustrates the heavy power window, as your kite climbs in
altitude, power and speed will decrease. The tan area is the
light power area and again, the grey area would represent the
upper edge of the wind window. Some kite flyers have nicknamed
the edge of the vertical wind window as the "rest" position.
Once again, all kites are different from each other and will
react differently throughout the power window areas. For
instance, if the wind is extremely strong, ram-air style kites
could still have tremendous power (in the form of lift) at the
edge of the vertical power window. Other kite designs, mostly
surf kites, are designed to give incredible amounts of lift at
the top of the wind window. To find out how your kite will
perform, learn how it reacts on a day that the winds are calmer.
This will let you know what to expect from your kite in heavier
wind conditions.

This diagram shows
a another view of the power window. The power in different areas
of the window can change from time to time when the wind
changes. A change in wind direction may put the heavy power
window in a different place than you last known it to be. Strong
wind gusts can also be surprising and sometimes a danger. A
strong gust of wind can pull you downwind, or even pull you
over...even if your kite is on the edge of the power window.
Always try to be aware of the wind and what it is doing while
you fly.
The more you fly, the more comfortable you will be with the
power of your kite and the strength of the wind. Experienced
kite flyers can feel a difference in the wind force through the
kite, lines, and handles, and they are usually able to adjust
for it more quickly than beginners. We suggest to many people
who are learning to fly to keep in mind the feeling of the wind
on their backs, their hair, or the backs of their ears to help
them determine the force of the wind and direction. A wind sock
or electronic wind meter is a better and more precise way of
determining wind direction. |
|